HEATLESS ALL IN ONE DEHUMIDIFYING DRYER

Project profile

- Closed loop feeding system, avoid the material is dried by exposure to the outside air and moisture;- Standard

service hotline:+86-769-85096969

Detail description

- Closed loop feeding system, avoid the material is dried by exposure to the outside air and moisture;
- Standard with hot air recovery, energy saving, no heat dust discharge, protection of the environment;
- Standard equipment blanking type suction box, make sure that no torn left pipe materials;
- Insulation barrel, down-blowing design to ensure that heat is not lost, increase drying efficiency;
- No heat regenerative device that provides a low dew point dry wind, speed up processing of raw materials.

Model   XM-25 XM-50 XM-75 XM-100 XM-150
Hopper capacity kg 25 50 75 100 150
Airflow m3/hr kw 200 270 300 319 390
Heater power kw 3.5 4 6 6 9
Drying blower w 135 170 185 200 320
Feeding blower kw 0.75 0.75 0.75-1.1 1.1 1.1-1.5
Air compressor power kw 1.1 1.5 2.2 3.7 4
Compressed air flow L/min 120 190 260 310 405
Dew point   -32℃~-40℃ -32℃~-41℃ -32℃~-42℃ -32℃~-43℃ -32℃~-44℃
Feeding pipe inch 1.5 1.5 1.5 1.5 2
Dimensions L*W*H mm 952*710 *1410 990*710 *1530 1090*740 *2120 1285*920 *2180 1285*920 *2380

Keyword:

Related reading